Decking Support Systems

Titan adjustable support pads are designed for decking and paving areas where very high clearance from the ground is required, or where minor changes to the final height is needed. Adjustable support pads are easy to use and are the best way to ensure a top quality finish on roofs, balconies and terraces.

Titan Support Pedestals

TITAN pedestals are height-adjustable support systems that can allow for slope corrections. There are a variety of applications for TITAN pedestals including the support of decking, paving blocks, water features, drainage gratings, roofing and flooring. The wide base design prevents damage to waterproof membranes placed below the support system.

System

Benefits

Simple installation
Versatile component system
Allows for slope correction
Easily removable and reusable
Allows for drainage, services reticulation and ventilation
Prevents damage of waterproofing membranes
Chemical resistant (PP)
UV-stable
Improves insulation
Reduces the translation of sound

Maximum uniform load range per pedestal of up to 2 235 kg* and height range of up to 1 280 mm.

*For a uniformly distributed load acting evenly over the applicable spacer or cradle surface. For heights greater than 400 mm  the pedestal base should be appropriately fixed to the foundation system. Refer to TITAN Installation Points.

DECKING KIT

Base kit includes

  • Titan support pedestal
  • Joist cradle cross type (type A)

Ranges from:

  • 18 - 23 mm adjustable kit base
  • 23 - 35 mm adjustable kit base
  • 32 - 46 mm adjustable kit base
  • 65 - 100 mm adjustable kit base
Enquire Now

Height extender kit includes:

  • T-base including adjustable ring
  • T-head including  fix collar
  • Joist cradle cross type (type A)
  • T extender(s)

Ranges from:

  • 95 - 185 mm adjustable kit
  • 185 - 320 mm - 1 x extender
  • 260 - 440 mm - 2 x extender
  • 350 - 580 mm - 3 x extender
  • 450 - 730 mm - 4 x extender
  • 540 - 880 mm - 5 x extender
  • 620 - 1 000 mm - 6 x extender
  • 720 - 1 150 mm - 7 x extender
  • 810 - 1 280 mm - 8 x extender
Enquire Now
  • 0-5 degree adjustable slope corrector
Enquire Now

TILE OR PAVER KIT

Base kit includes:

  • Titan support pedestal
  • Joist cradle cross type (type A)

Ranges from:

  • 14 - 19 mm adjustable kit base
  • 19 - 31 mm adjustable kit base
  • 28 - 42 mm adjustable kit base
  • 41 - 64 mm adjustable kit base
Enquire Now

Height extender kit includes:

  • T-base including adjustable ring
  • T-head including fix collar
  • Joist cradle cross type (type A)
  • T extender(s)

Available in:

  • 181 - 316 mm - 1 x extender
  • 256 - 436 mm - 2 x extender
  • 346 - 576 mm - 3 x extender
  • 446 - 726 mm - 4 x extender
  • 536 - 876 mm - 5 x extender
  • 616 - 996 mm - 6 x extender
  • 716 - 1 146 mm - 7 x extender
  • 716 - 1 146 mm - 8 x extender
Enquire Now
  • 0-5 degree adjustable slope corrector
Enquire Now

G-Struct

The G-struct deck framing system is a galvanised steel substructure solution. G-struct sections are manufactured from industrial grade pre-galvanised coil, providing a long term support system.

Benefits

Suitable for all outdoor and indoor framing applications
Lightweight
Manufactured from pre-galvanised coil
Open channels allow water to drain and the frame to breathe
Sections are consistently straight
No visible seam welds
Rapid assembly system
No welding required
No pre-drilling required

Available in

  • G-struct pre-galvanised steel deck frame system
Height (H) Breadth (B) Lip Channel (C) Thickness (T) Length (L)
100mm 50mm 20mm 2mm 5800mm
125mm 50mm 20mm 2mm 5800mm
150mm 50mm 20mm 2mm 5800mm
175mm 50mm 20mm 2mm 5800mm
200mm 50mm 20mm 2mm 5800mm
75mm 50mm 20mm 2mm 5800mm
50mm 25mm 10mm 2mm 5800mm
50x40mm 25mm 10mm 2mm 5800mm
Enquire Now

Available in

Height (H) Breadth (B) Thickness (T) Length (L)
76mm 76mm 2mm 5800mm
76mm 76mm 2mm 1300mm
Enquire Now

Pine Support System

It is prudent to utilise a substructure system that matches the lifespan of your deck. When selecting timber be sure to consider the intended application and the local building codes. Eva-Last® offers several timber solutions based on the requirements of the deck. Standard H3 level pine is available for the continental highveld climate. H4 to H6 level pine which is available for alternative applications such as Mediterranean climates and coastal areas. H3 level pine beams and H4 level gum poles are regularly stocked.

Available in:

  • Pine 114 x 38 x 5400 CCA Treated (H3)
  • Pine 152 x 38 x 5400 CCA Treated (H3)
  • Pine 152 x 50 x 5400 CCA Treated (H3)
  • Pine 76 x 50 x 5400 CCA Treated (H3)
  • Pine 228 x 50 x 5400 CCA Treated (H3)
  • Pine 228 x 38 x 5400 CCA Treated (H3)
Enquire Now

Available in

  • Gum Pole CCA treated (H4) 125-150 x 1800mm
  • Gum Pole CCA treated (H4) 125-150 x 2700mm
Enquire Now

Foamed PVC batten

The PVC batten support system offers a simple and effective substructure solution for easy installation. The batten is placed atop a rubber support pad (to allow for drainage) and then nailed into the existing structure. Eva-Last® composite decking profiles are subsequently installed atop this. This can be utilised as either a flooring or cladding application.  It is advisable to use the Titan support pedestals for use atop waterproofing membranes and not the composite batten system.

Available in

  • Sub Frame joist 40 x 30 x 2900 - PVC
Enquire Now

Inspiration

Image Gallery - Composite Decking

IMAGE GALLERY

Explore our image gallery and picture a brand new deck that compliments your lifestyle.

> VIEW GALLERY

WHERE TO BUY

Eva-Last® Products are available nationwide, search our directory of stockists.

> SEARCH NOW

EVA LAST® VIDEOS

See the benefits of Eva-Last® come to life with our selection of videos.

> WATCH MORE

For all your support system requirements